65 mm x 100 mm x 16,5 mm NSK 65BAR10H Machined Brass Cages Angular Contact Ball Bearings

With San Driveshaft Co., Ltd. over 10170 full-service stores, our 65 mm x 100 mm x 16,5 mm NSK 65BAR10H Machined Brass Cages Angular Contact Ball Bearings inventory is extensive and our parts are priced right. 14,288 mm D within 24 65 mm x 100 mm x 16,5 mm hours. This helps you maximize your productivity by saving time and your hard-earned dollars.

What is 65BAR10H bearing cross reference´╝č

Brand Name:NSK
Model Number:65BAR10H
C:11,13 mm
Outer Diameter (mm):14,288
D:14,288 mm
Size (mm):65 mm x 100 mm x 16,5 mm
C2:2,3 mm
Width (mm):11,13
Brand:NSK
Basic dynamic load rating (C):6,65 kN
PDF 65BAR10H

Product Details

C11,13 mm
Outer Diameter (mm)14,288
D14,288 mm
Size (mm)65 mm x 100 mm x 16,5 mm
C22,3 mm
Width (mm)11,13
BrandNSK
Basic dynamic load rating (C)6,65 kN
Weight0,0068 Kg
Fw7,938 mm
View more

Company Profile

Phone 55-156899
View more

Related News

  • Bearings mounting guide: methods and tools | ERIKS shop NLFor the press fitting method, a mounting tool is placed on the inner ring, then the bearing is pressed on the shaft, slowly, until the side of the inner ring rests against  Mounting |...
  • Sealed Bearing Rebuild—Breaking the Seal | BIKE MagazineJan 8, 2019 — Make sure everything is wiped clean, and use a sharp pick or the corner of a razor blade to carefully peel up the outside edge of one of the rubber  Bearing...
  • SKF 6206 JEM - MotionBuy SKF 6206 JEM Radial/Deep Groove Ball Bearing - Round Bore, 30 mm ID, 62 mm OD, 16 mm Width, Open, C3 Internal Clearance at Motion Industries 2RS JEM SKF, deep groove ball bearing defect frequenciesDownload Table | 2RS JEM...
  • Recommended Products

    All Products Contact Now