NTN 7904UC Reduced Torque from Optimized Design Precision Bearings

Online NTN 7904UC Reduced Torque from Optimized Design Precision Bearings Expert.More Choices. San Driveshaft Co., Ltd. NTN 7904UC Reduced Torque from Optimized Design Precision Bearings in 1.1202 / 1.1164 Bearing Bore after Mounting (di) Stock & Ready to Ship 30 ID Chamfer Angle (B deg.) Now!

What is 7904UC bearing interchange?

Brand Name:NTN
Model Number:7904UC
Bearing Bore after Mounting (di):1.1202 / 1.1164
Shaft Size (ds):1.1138 / 1.1126
ID Chamfer Angle (B deg.):30
Housing Bore Dia. (Dh):1.2822 / 1.2812
Bore Diameter (mm):28,575
Bearing Length, Nominal (B):1.000
Average Clearance (Cd):0.0050
Bearing Outside Diameter, Nominal(Do):1.281

Product Details

Bearing Bore after Mounting (di)1.1202 / 1.1164
Shaft Size (ds)1.1138 / 1.1126
ID Chamfer Angle (B deg.)30
Housing Bore Dia. (Dh)1.2822 / 1.2812
Bore Diameter (mm)28,575
Bearing Length, Nominal (B)1.000
Average Clearance (Cd)0.0050
Bearing Outside Diameter, Nominal(Do)1.281
Lube Hole Dia. (dl)0.250
Bearing numberAST20 18IB16
View more

Company Profile

Phone 55-156899
View more

Related News

  • Bearings mounting guide: methods and tools | ERIKS shop NLFor the press fitting method, a mounting tool is placed on the inner ring, then the bearing is pressed on the shaft, slowly, until the side of the inner ring rests against  Mounting |...
  • Sealed Bearing Rebuild—Breaking the Seal | BIKE MagazineJan 8, 2019 — Make sure everything is wiped clean, and use a sharp pick or the corner of a razor blade to carefully peel up the outside edge of one of the rubber  Bearing...
  • SKF 6206 JEM - MotionBuy SKF 6206 JEM Radial/Deep Groove Ball Bearing - Round Bore, 30 mm ID, 62 mm OD, 16 mm Width, Open, C3 Internal Clearance at Motion Industries 2RS JEM SKF, deep groove ball bearing defect frequenciesDownload Table | 2RS JEM...
  • Recommended Products

    All Products Contact Now