NSK 7207C Duplex angular contact ball bearings

100% Authentic. 1 mm r1,2 - min. NSK 7207C Duplex angular contact ball bearings Highest 0.15 kg Mass support roller Quality. San Driveshaft Co., Ltd. Certified Supplier.

What is 7207C bearing interchange´╝č

Brand Name:NSK
Model Number:7207C
Mass support roller:0.15 kg
r1,2 - min.:1 mm
Bearing number:RNA 2204.2RS
Limiting speed:4000 r/min
Basic dynamic load rating - C:16.1 kN
Outer Diameter (mm):47
D1:33 mm

Product Details

Mass support roller0.15 kg
r1,2 - min.1 mm
Bearing numberRNA 2204.2RS
Limiting speed4000 r/min
Basic dynamic load rating - C16.1 kN
Outer Diameter (mm)47
D133 mm
Minimum Buy QuantityN/A
Fatigue load limit - Pu2.2 kN
View more

Company Profile

Phone 55-156899
View more

Related News

  • Bearings mounting guide: methods and tools | ERIKS shop NLFor the press fitting method, a mounting tool is placed on the inner ring, then the bearing is pressed on the shaft, slowly, until the side of the inner ring rests against  Mounting |...
  • Sealed Bearing Rebuild—Breaking the Seal | BIKE MagazineJan 8, 2019 — Make sure everything is wiped clean, and use a sharp pick or the corner of a razor blade to carefully peel up the outside edge of one of the rubber  Bearing...
  • SKF 6206 JEM - MotionBuy SKF 6206 JEM Radial/Deep Groove Ball Bearing - Round Bore, 30 mm ID, 62 mm OD, 16 mm Width, Open, C3 Internal Clearance at Motion Industries 2RS JEM SKF, deep groove ball bearing defect frequenciesDownload Table | 2RS JEM...
  • Recommended Products

    All Products Contact Now